Kwale International Sugar Company 68 Jobs in Kenya

Located in the South Coast of Kenya between Kwale and Ramisi, Kwale International Sugar Company Limited (KISCOL) is in the process of establishing a green field sugar cane estate of 5,000 hectares as well as a processing complex with a capacity of 3000TCD

In line with its vision to be a world class corporate the Company would like to recruit qualified and experienced individuals for the following positions:

1. Analytical Chemists
2. Ash Handling Operator/Attendant
3. Assistant Stores Keeper
4. Assistant In -Charge
5. B & C Magma operators
6. Bagasse carrier Attendant
7. Bagasse Yard Back Pusher Drivers
8. Bagasse Yard Supervisor
9. Boiler Attendant
10. Boiler Fireman
11. Boiling House Fitter
12. Cane carrier Attendant
13. Cane Platform Supervisor
14. Centrifugal Mate
15. Chief Engineer
16. Chief Weigh Bridge
17. Cogen Engineers
    
18. Cogen Head
19. Continuous Machine Operator
20. Crystalliser Attendant
21. Crystallizers operator
22. Data Capture [technical]
23. DCS Operators - Mill House
24. DCS Operators (Boiler)
25. DCS-operator - Process House
26. Drilling & Cutting Machine Operators
27. Effluent Treatment Plant Operator
28. Electrical In-charge
29. ETP Operator helper
30. Factory manager
31. Feeder Table Operator
32. Fore Man
33. Fuel Handling System Operator
34. High Pressure Welder
35. Hilo Operator
36. instrumentations
37. Inter carrier operator
38. Juice Heaters Operators
39. Lab Chemist
40. Lab Incharge
41. Logistics officer [sugar/mol/scums/wastes etc …]
42. Manager/Asst.Manager
43. mill drives operator / lub
44. Mill Maintenance Manager
45. mobile crane driver
46. Oilman - Mill House
47. Pan In Charge
48. Pan Man
49. Preparation Juice Defecator (lnlineLine Mixer) & MOL Preparation
50. Pump Attendant
51. Security officer on shift
52. Security patrol  man
53. seed melter operator
54. Shaping/Planning Machine Operators
55. Shift Engineers
56. Shift Instrumentation Engineer
57. Sugar bag filling operator
58. Sugar bags conveying and stacking ( local Casual )
59. Sugar ware House - In-Charge
60. Sulphur burner/MOL/Syrup clarification Attendant
61. Switch Board Attendant
62. Syrup clarifier operator
63. Turbine Attendant
64. Vacuum filter & Sulphur burner helper
65. vacuum filter operator
66. Water man
67. welder -elect w/shop
68. Wireman

Detailed job description for the above positions are available on our website: www.kwale-group.com
 

Ideal candidates with relevant qualifications and work experience can send in their updated resumes to careers@kwale-group.com

Read More

Rotary Drillers, Drilling Superintendent, Borehole Pumping Plant Electrician and Welders Jobs in Kenya

Applications are invited from suitably qualified individuals to fill in the following positions.
 

A Rotary Drillers
 

Qualifications

• With experience both air and mud drilling
• Must have a valid driving license
• Diploma in water technology will be beneficial.

B Drilling Superintendent
 

Qualifications

• With experience in both air and mud drilling
• Diploma in water technology is the minimum standard. 
• Preference will be given to applicants with mechanical/civil engineering, with proven project management skills, and excellent communication skills.
• Must have a valid driving license.

C Borehole Pumping Plant Electrician
 

Grade 1
 

Qualifications

• Must have substantial experience with borehole pumping plant
• Must be in possession of grade 1 certificate from a recognized training institution.

D Welders
 

Qualifications

• Must be in possession of grade 1 certificate from a recognized institution
• Must have substantial experience in welding and fabrication.

Qualified and interested candidates are requested to submit their applications to:
 

The Human Resource Manager,
Drilling Spares and Services Limited
P.O Box 40859 – 00100, GPO 

Nairobi – Kenya

So as to reach us not later than 20th August 2014

or email hr@drillingspareskenya.com

Read More

Engineering Firm Job Vacancies in Kenya

An established and growing engineering firm is looking for skilled and experienced technical personnel to fill a number of positions. 

An attractive package is offered commensurate with skills and experience presented as well as advanced facilities in which to work on quality products.
 

Management and Admin
 

Service Manager
 

15 years minimum hands-on experience in installation and service of industrial machinery and plant. 

Experience in mobile plant eg forklifts, cranes is an advantage.

Must have proven track record in managing a medium sized busy service facility / department.
 

Administration Secretary
 

Minimum 10 years’ experience in record keeping. 

Fluent English. 

Experience using word-processor and spreadsheet.
 

Sales
 

Sales Engineer
 

10 years’ experience in selling of technical machinery / engineering products.
 

Service
 

Plant Mechanics / Service Technicians / Service Engineers
 

Diploma and 5 years+ experience service of mobile plant / handling equipment. 

Good mechanical and electrical skills. 

Drivers licence.
 

Senior Service Engineer / Senior Plant Mechanic
 

15 years+ experience in service of earth mobile plant / handling equipment.
 

Management skills would be advantageous. Drivers licence.
 

Electronic Technicians
 

Degree/diploma in electronics/electrical engineering and possess sound knowledge of microprocessor circuits in PC/Industrial/POS applications with at least 4 years experience in installation of circuit boards and peripherals.
 

Production
 

CNC Operator – Milling & CNC Operator – Turning  

(2 Positions)

Must have at least 5 years experience on CNC production machinery. 

Can program independently and to consistently produce high quality parts from CAD drawings. 

Less experience on CNC machinery supported by experience with conventional machinery will be considered.

Production Engineer
 

Must have degree in Mechanical Engineering with experience in CAD in design and fabrication.
 

Fitters / Welders
 

10 years’ experience in structural / machinery fabrication.
 

Storekeeper
 

Must have minimum 10 years’ experience in a busy engineering store.
 

Lathe Machine Operator
 

Must have at least 10 years’ experience in high accuracy lathe machine work
 

Deadline for application is 15th April, 2014.
 

Apply to;
 

DN/A 1654
P.O. Box 49010 - 00100 

Nairobi.

Read More

Engineering Firm Jobs in Kenya

An established and growing engineering firm is looking for skilled and experienced technical personnel to fill a number of positions. 

An attractive package is offered commensurate with skills and experience presented as well as advanced facilities in which to work on quality products.

Management and Admin
 

Service Manager
 

15 years minimum hands-on experience in installation and service of industrial machinery and plant. 

Experience in mobile plant eg forklifts, cranes is an advantage. 

Must have proven track record in managing a medium sized busy service facility/ department.

Administration Secretary
 

Minimum 10 years experience in record Keeping, Fluent English. 

Experience using word-processor and spreadsheet.

Sales
 

Sales Engineer
 

10 year experience in selling of technical machinery/engineering products.

Service
 

Plant Mechanics / Service Technicians / Service Engineers
 

Diploma and 5 years + experience service of mobile plant/handling equipment.

Good mechanical and electrical skills. Drivers licence.

Senior Service Engineer / Senior Plant Mechanic

 
15 years + experience in service of earth mobile plant/handling equipment.

Management skills would be advantageous. 

Drivers licence.

Electronics Technicians
 

Degree/diploma in electronics/electrical engineering and possess sound knowledge of microprocessor circuits in PC/Industrial/POS applications with at least 4 year’s experience in installation of circuit boards and peripherals.

Production
 

CNC Operator – Milling & CNC Operator – Turning 

(2 Positions)
 

Must have at least 5 years experience on CNC production machinery. 

Can program independently and to consistently produce high quality parts from CAD drawing.

Less experience on CNC machinery supported by experience with conventional machinery will be considered.

Production Engineer
 

Must have degree in Mechanical Engineering with experience in CAD in design and fabrication.

Fitters / Welders

10 years experience in structural/machinery fabrication.

Storekeeper

Must have minimum 10 years experience in a busy engineering store.

Lathe Machine Operator
 

Must have at least 10 years experience in high accuracy lathe machine work.

Send your application to the below address on or before 7th April 2014:

TS 2198
P.O. Box 49990 - 00100
Nairobi

Read More

Zenith Senior Operations Manager, Workshop Manager, Steel Erection Supervisor, Projects Engineer, Marketing Engineer, Steel Erectors, Welders & Fitters Jobs in Kenya

Zenith Steel Fabricators

We are a leading steel fabrication firm seeking to expand our operations in East Africa.
 

We are looking for the following personnel for our local and regional offices.
 

A. Senior Operations Manager

• Over 10yrs in steel fabrication and erection of structural steel work with Degree in structural Engineering.
• Detailed knowledge of materials and structural engineering drawings used in fabrication and erection works.
• Responsible to supervise project schedules, implement project plans as per approved budget, deadline and project specifications

B. Workshop Manager

• Over 8 yrs experience with Degree in Engineering (Structural or Mechanical)
• Will manage all aspects of fabrication, workshop and its teams, ensuring that items are fabricated to the highest quality & delivered on site to meet installation programs and deadlines.
• Must have a thorough understanding of machines, materials and structural engineering drawings in steel fabrication & erection works.

C. Steel Erection Supervisor

• Over 8yrs experience with a Diploma in Engineering.
• Will manage all aspects of steel erection at construction sites
• Ensuring buildings are safely delivered to meet specifications and deadlines.

D. Projects Engineer

• Bsc. Degree in Civil / Structural Engineering.
• 5 years experience and sound knowledge in the processes involved in steel fabrication

E. Marketing Engineer

• Over 3 years experience in marketing with relevant skills

F. Steel Erectors, Welders & Fitters
 

Over 5years experience in steel fabrication / erection with relevant skills

Interested candidates should apply by E-mail using the address below on or before 7th February 2014.

Email: sales@zenithsteel.com

Read More

Kenya Fluorspar Company Welder / Fabricator Job in Kerio Valley

About Us
 

WISER (Women Institute for Secondary Education & Research) is located in Muhuru bay,Nyatike Districts of Nyanza Province in Kenya.

The mission of WISER is to improve educational, economic and health outcomes of girls;create gender allies in boys,and promote community wide enhancements in health and development;

WISER is currently looking for a graduate teacher, with a combination in Kiswahili and business studies.

Applications  to be sent to dorcas.oyugi@gmail.com or Mikulakennedy@yahoo.com not later than 6th May 2012.

Read More

CNC Operator, CAD Operator, Workshop Manager, Fitter / Welders, Plant Mechanics and Secretary Jobs in Kenya

CNC Operator
 

Turning and milling operator required. 

Must have at least 5 years hands on prior experience on CNC machinery. 

Must be able to program independently and demonstrate ability to consistently produce high quality work pieces from Cad drawings.

CAD Operator
 

CAD operator with at least 3 years experience in CAD operations.

Preference to CAD in mechanical environment. Solidworks and Autocad seats are used.
 

Workshop Manager
 

15 years minimum hand on experience in fabrication and service of industrial machinery and plant with reputable companies.
 

Preference to having also experience in hydraulics equipment.
 

Must have proven track record in managing and leading a busy workshop.
 

Fitter / Welders
 

10 years’ experience in machinery fabrication.
 

Plant Mechanics
 

10 years experience in repair and maintenance of hydraulic equipment.
 

Administration Clerk / Secretary
 

Minimum 10 years experience with fluent English, proven ability to use word-processing programmes on computer preferred.
 

All application should be forwarded with CV’s and testimonials to:
 

DNA / 1486
P.O Box 49010 - 00100
Nairobi

Read More

AIC Kijabe Hospital Training Coordinator, Carpenter and Welder Jobs in Kenya

AIC Kijabe Hospital is a church based hospital established in 1915.  

Having a bed capacity of 260 beds, we seek to provide excellent compassionate health care, education and spiritual ministry in the name of Jesus Christ summed up with the motto "Health Care to God’s glory!”
 

Located 65 km from Nairobi, we serve a varied range of clientele from all over Kenya and neighboring countries setting ourselves as a regional beacon of hope. 

As a service organization, we recognize that a team of people with great character, compassion and skills are Kijabe Hospital’s most valuable resource.
 

AIC Kijabe Hospital invites application from competent and qualified Christians for the following positions.

Training Coordinator

Purpose: Provide support and coordination to the Kijabe Training Program.

The clinical mentorship program will provide hands-on training for healthcare workers from mission and public institutions. 

Clinical mentorship emphasizes on competency based educational methods.

Duties and Responsibilities:

• Administrative functions:-

1. Office management,
2. Organizing training sessions including venues, accommodation & meals
3. Sending communication to participants and trainers.
4. Ordering for supplies including following up with certification process.

• Attending or calling for regular meetings including relevant stakeholder meetings and action plan follow-up from such meetings.
• Capturing training details in the computer and maintaining appropriate records related to the training; in soft and hard copies.
• Ensure that assessment and evaluation of trainings are conducted and a report of the same is submitted to the relevant authorities.
• Perform training management functions.
• Preparation and submission of monthly, quarterly and annual reports
• Preparation of the Training Program annual budget.
• Maintaining positive relationships with certifying bodies for the training program.

Skills & Knowledge

• Training coordination and administration
• Conducting trainings and meetings involving individuals from diverse locations
• Computer software and databases.

Minimum Acceptable Qualifications:   

• Minimum degree preferably: in Administration or any other related field.
• Computer literate and ability to competently work with training software programs and databases.

Carpenter 

1 Position

Acceptable Qualification: Grade I in carpentry

Welder 

1 Position
 

Acceptable Qualification: Grade I in welding

If you consider yourself fit for the position, kindly send your application and CV to recruit.kh@kijabe.net on or before 18th March 2013.

To view detailed positions descriptions and to apply, please visit www.kijabehospital.or.ke careers page.

Only short-listed candidates will be contacted

Read More

Chemists, Mechanical Engineers, Electrical Engineers, Fitters, Welders, Storekeepers and Plant Accountants Jobs in Western Kenya

New Employment Opportunities in the Western Region

Our client, the fastest growing steel producer in East Africa, will shortly be opening a 300,000 ton, state-of-the-art integrated steel plant in Awasi - the first of its kind in sub-Sahara Africa - creating hundreds of new jobs for Kenyans in the western region. 

Vacancies exist for the following categories of personnel:
 

- Chemists
 

- Mechanical Engineers
 

- Electrical Engineers
 

- Fitters
 

- Welders
 

- Storekeepers
 

- Plant Accountants
 

Suitably qualified candidates, preferably with steel industry experience, should apply by sending copies of their CVs to mikeholtham@gmail.com by not later than Friday 15th March.

Please do not send scanned copies of other documents such as trade certificates and academic qualifications, original copies of which should instead be presented at interview.

Mike Holtham and Associates
Business and Organisation Development
in Africa and the Middle East
“Let our challenge be your solution”

Read More

Finlays Panel Beater / Welder Job in in Ibis Farm, Timau, Kenya

Panel Beater / Welder
 

The Organization
 

Finlays is a vertically integrated and geographically diversified agri-business that takes a leadership role in sustainability. 

The group has established itself as a reliable, responsible, innovative and sustainable producer with a deep knowledge and passion for its products. 

Sustainability is pivotal to the group’s success and it lies at the heart of what Finlays does and stands for. 

Finlays is Kenya’s largest agricultural export group employing over 21,000 people and annually exporting over 300 million stems of flowers, 7 million kilos of vegetables, 26 million kilos of black tea and 3 million kilos of tea extract. 

The organization is geographically located in Nairobi, Naivasha, Kericho, Mt. Kenya and Mombasa and works with 1,200 vegetable out growers and 10,000 tea out growers.
 

The Job
 

We intend to recruit a Panel Beater to join our Workshop in Ibis farm - Mt. Kenya Region (Near Nanyuki, - Laikipia).
 

Key Responsibilities

• Determining vehicle damage and recommended repair procedure
• Doing any welding work required and removing damaged panels and fixing dents.
• Using mechanical and hydraulic equipment to straighten and realign chassis and body frames and using welding equipment to cut and join replacement sections or damaged panels.
• Rustproof vehicle, remove rough spots on vehicle panels, carrying out masking procedures.
• Colour matching and mixing paints, applying primer and finishing coats and polishing and waxing the finished paintwork.

Desired Competences/Qualifications

• Government Trade Test 1
• Good communication skills.
• Three years experience in the same capacity in a busy Workshop will be an added advantage.
• Able to work with minimum supervision.

If you fulfill the above requirements, send your application together with copies of relevant certificates and testimonials and daytime telephone contact to reach the undersigned on or before 15th December 2012
 

Human Resources Manager
Finlays Horticulture (K) Limited
Private Bag
Nanyuki-10400
 

Applications can also be emailed to personnel.Sirimon@finlays.net
 

Only short listed candidates will be contacted.
 

Finlays Horticulture (K) Limited is an Equal Opportunity Employer

Read More

Engineer, Welders, Mechanics, Secretary Jobs in Kenya

Workshop Manager

• 15 years minimum hands on experience in fabrication and service of industrial machinery and plant with reputable companies. 
• Preference to having also experience in hydraulic equipment. 
• Must have proven track record in managing and leading a busy workshop.

Sales Engineer

• 10 years experience in marketing technical / engineering products and equipment.

Fitters / Welders

• 10 years experience in machinery fabrication

Plant Mechanics

• 10 years experience in repair and maintenance of hydraulic equipment.

Administration Clerk /Secretary

• Minimum 10 years experience with very fluent English, proven ability to use word-processing programmes on computer preferred.

All applications should be forwarded with CV’s and testimonials to:
The Managing Director
P.O Box 59475
Nairobi 00200

Read More

South Nyanza Sugar Company Jobs in Kenya July 2012

We are in the process of diversifying and transforming our operations to meet the ever changing customer requirements by producing ethernal and co-generation. 

In this regard we seek to enhance our human capital base by filling the following strategic positions with vibrant and competent Kenyan Citizens:-

1.    Mechanical Engineering Manager

Reporting to Head of Manufacturing, the Mechanical Engineering Manager will be responsible for:

• Enabling production targets to be met by eliminating avoidable factory stops attributable to mechanical failures.
• Planning and implementing preventive maintenance systems in the Factory plant.
• Preparing operational specifications and controlling engineering Projects.
• Operating the division within the approved budget of all resources, man, money, material and time.
• Preparing timely, divisional monthly reports.
• Enforcing safety policy in the factory.
• Organizing plant inspection scheme with a view to minimizing downtime.
• Planning and co-coordinating Effective Annual Plant and weekly maintenance.
• Improving the performance standards of all employees in the division by organizing and implementing training seminars, coaching etc.
• Maintains high level of discipline within the division.
• Providing strategic input in the area of Mechanical Engineering in Manufacturing

Person Specifications

• A holder of Bachelors’ Degree in Mechanical Engineering, from a recognised institution with eight (8) years’ relevant work experience in a similar environment.
• Post graduate qualification in any of the following;- project management, strategic management, maintenance and condition monitoring, environmental management or any other related field from a recognised institution
• Registered with a professional body.
• Attended a senior management course for a period lasting not less than 4 weeks
• Performance and results.
• Computer proficiency
• Aged at least 30 years and above

2.    Senior Internal Auditor      
     
Reporting to the  Audit Manager, the Senior Internal Auditor will be responsible for:

• Conducting independent audits of the operational and financial functions of Sony sugar so as to identify weaknesses in the effectiveness and efficiency of controls and propose recommendations for improvement
• Prepare annual audit schedules and programs, perform risk exposure assessments and provide recommendations to minimize the risks and safeguards the Company assets.
• Carry out system audits and appraise the application and adequacy of accounting, financial, procurement and other controls.
• Review the work of internal auditors for quality and completeness, taking key risks into consideration.
• Prepare and submit audit reports including recommendations to management and the Board Audit Committee.
• Follow up on recommendations to ensure they are implemented.

 Persons Specification

• A degree in Accounting, Business Administration or Finance from a recognized University.
• A qualified accountant (CPA Finalist / ACCA) or Certified Internal Auditor (CIA)
• At least three (3) years’ experience in a similar position, preferably in a Manufacturing or Audit firm.
• Good analytical, interpersonal and problem solving skills.
• Experience in using Computer Assisted Audit Techniques (CAATs).
• Possession of CISA qualifications an added advantage.
• Below 45 years of age

3.    Legal Officer

Reporting to the Legal Services Manager, the legal Officer will be responsible for:

• Ensuring all legal affairs of the Company are efficiently managed and provides legal services to all departments of the Company.
• Reviewing and drafting contracts, leases and agreements on behalf of the Company.
• Providing legal advice on suits filed by or against the Company.
• Advising the Company on any new laws, regulations or statutes relevant to activities of the Company.
• Acting as a legal consultant for the Company in any legal matters, mediations, arbitrations
• Offering support to the procurement unit on legal matters.
• Drafting letters and correspondences on behalf of the Company, when called upon to do so.
• Assisting in establishing an effective court cases management system
• Developing key controls, alerts, measures and reporting systems to minimize risks.
• Developing an effective contracts management system.
• Advising management through monthly reports on contract status and any potential exposures.
• Any other duties as may be assigned from time to time.

Person Specifications

• Bachelor of Law degree from a reputable University and enrolled as advocate of the High Court.
• Postgraduate Diploma from Kenya School of Law.
• At least five years working experience in a busy commercial oriented organization.
• Good appreciation of Public Procurement processes in the public sector.
• Knowledge in contract management/administration.
• Good communication, drafting, negotiating and arbitration skills.
• High personal integrity.
• Below 45 years of age 

4.    Electrical Engineer

Reporting to the Electrical Engineering Manager, Electrical Engineer will be responsible for:

• Ensuring effective coordination, budgeting and execution of specific activities in his/her section aimed at securing optimal plant/equipment availability for efficient sugar processing. He/she will also be responsible for:
• Planning, installation and Commissioning of electrical machines and systems to the right standards.
• Planning and Supervision of all electrical Section human resources, daily works and maintenance.
• Availing of electrical equipment, Machinery and Systems to meet the desired corporate goals
• Embracing of customer focus, teamwork, integrity and staff requirements
• Ensuring health, safety and environmental practices are adhered to.
• Controlling cost of running electrical equipment, machinery and human resources within the approved targets.
• Availing of electrical plants by carrying out trouble shooting in electrical lines, machines, electrical drives and their systems.
• Carrying out proper section planning and execution of budget and capital projects within the approved targets.
• Periodically reviewing equipment and systems in line with market technology changes and advice management appropriately.

Person Specifications

• Must be holder of Bsc. (Electrical Engineering) from a recognized University.
• Knowledgeable in electrical fault diagnosis, trouble shooting, equipment maintenance, budgeting, condition monitoring and maintenance or project management or strategic management.
• At least 5 years ‘hands- on’ experience from a recognized firm preferably manufacturing industry and conversant with work on electrical systems up to 11kv and above.
• Demonstrate ability in Variable Speed Drives (VSD), Programme Logic Controls systems (PLC), Supervisory Control and Data Acquisition (SCADA), Relays & Metering testing and calibration . Instrumentation and Electronic controls will be an added advantage
• Must be knowledgeable in energy management and conservation systems.
• Member of relevant Professional body
• Able to display high level of integrity with good interpersonal and communication skills
• Champion the section Quality and Environment  Management Systems
• Must be IT Proficient
• Must be able to work long hours to meet deadlines
• Aged below 45 years

5.    Instrument Superintendent

Reporting to Instrument Engineer, the Instrument Superintendent will be responsible for:-

• Ensuring effective coordination and execution of specific activities aimed at securing optimal plant/equipment availability for efficient sugar processing.
• Ensuring appropriate installation, commissioning, maintenance, service and repair of all instrumentation equipment, machines and systems.
• Managing periodical inventory of equipment, machinery, systems and spares. Update/ review upgrade, obsolescence, technology, replacement and replenishment. Advice management appropriately.
• Ensuring compliance with the sectional approved expenditure plans.
• Adhering to environmental, health and safety policy.
• Organizing and coordinating staff duty allocation and performance in instrument section.
• Prepare periodic section reports as shall be required.
• Preparing and executing planned preventive maintenance for all instruments and control equipment to assure reliable and accurate functioning/ optimal asset life cycle management.
• Overseeing control and measurement of equipment calibration programs in liaison with service providers to augment these services and maintain records.
• Undertaking In - house training for workforce.  Advise and follow up on staff training needs with relevant offices.
• Championing the section Quality and Environment  Management Systems
• Carrying out proper section planning and execution of budget and capital projects within the approved targets.
• Attending to any other duties as shall be assigned by superiors.

Person Specification

• B. Sc. In Electrical Engineering or Instrumentation/electronics.
• Minimum 3 years relevant post college experience in controls and Instrumentation preferably in a production environment.
• Must demonstrate knowledge and competency in configuring & Programming Industrial Variable Speed Drives (VSD), Programme Logic Controls systems (PLC), Supervisory Control and Data Acquisition (SCADA) systems
• Must possess experience in supervising junior engineers and artisans in work tasks.
• Able to display high level of integrity with good interpersonal and communication skills
• Undertake cross functional tasks in a team context.
• Registered as a graduate engineer
• Must be IT Proficient
• Ability to work long hours
• Aged below 45 years.  

6.    Production Superintendent 

(3posts)

Reporting to Production Manager, the Production Superintendent will be responsible for:-

• Coordinating of all shift operations to ensure that the projected quantity and quality of sugar is produced efficiently.
• Effective manning deployment of workers/operators on shift.
• Optimal cane off-loading, stacking and feeding into the cane carriers.
• Effective control of juice treatment and clarification processes
• Sugar loss prevention and control in processing.
• Effective and efficient handling of sugar in drying, weighing, bagging processes and assuring safe storage as per SOP’s.
• Effective treatment and supply of water to satisfy requirements in the factory and residential estates.
• Motivation and competency development of workers.
• Ensuring good human and industrial relations

Person Specifications

• Holder of any of the following degrees Bsc. Chemical Engineering, / Food Technology , /Industrial Chemistry or,  Chemistry from a recognized university
• Minimum 2 years’ experience in a food manufacturing plant.
• Must be a person of high personal integrity, good interpersonal and   communication skills
• Proficient in IT  and a team player
• Aged below 45 years

7.    Fitter 

( 10 posts)
Reporting to Maintenance Supervisor, the Fitter will be responsible for:

• Ensuring availability of Plant by repairing breakdowns
• Monitoring operations to detect defects
• Ensuring safe house keeping
• Carrying out programmed jobs
• Repairing of breakdowns effectively to be able to handle pumps and general machinery alignment both angular and linear. Must be able to read Vaneer  calipers and Micrometer Screw gauge  amongst the tools
• Carry out routine maintenance of equipment and plant

Person Specifications

• Holder of KCSE C or KCE Div. III certificate and above
• Diploma in Mechanical Engineering with three (3) years relevant work Experience or,
• Craft certificate in Mechanical Engineering with at least five (5) years relevant Work experience preferably in a busy manufacturing firm.
• Aged below 45 years

8.    High Pressure welder 

(2 posts)

Reporting to Boiler Supervisor, the High Pressure Welder will be responsible for:-

Carry out manufacture, repair and maintenance of equipment/plant components through welding processes, with special bias to steam boiler (high pressure) systems

• Welding of pressure parts both boiler and stir compressor parts.
• Welding of boiler pressure parts.
• Welding or plugging tubes.
• Repairing of tubes.
• Welding or repair of steamed compressors and piping.
• Maintaining safety of the welding gas equipment.
• Ensuring safety of machines, equipment and his co-workers.
• Ensuring good housekeeping.
• Hard facing of induced draft fans.
• Handling general welding jobs at the boilers.

Person Specifications

• KCSE/KCE  certificate
• Final Craft Certificate in Welding
• Five (5) years’ experience in welding (Arc, Gas, TIG/MIG, etc.) in a busy manufacturing, steel construction, or similar industry
• Preference will be given to those with experience in welding high pressure steam systems
• Possession of Coded Welder Approval Test Certification or equivalent qualification will be added advantage
• Aged below 45 years

9.    Machinist 

(5 posts)

Reporting to Workshop Supervisor, the Machinist will be responsible for

• Carry out manufacture, repair and maintenance of equipment/plant components through welding processes, with special bias to steam boiler (high pressure) systems.
• Processing (turning, milling, shaping, gear cutting, etc.),
• Do precision machining Production of components through various machining processes to support equipment/plant maintenance activities of the factory.
• Making spare parts by turning, milling and shaping
• Ensuring spare parts are made on the lathe shaper and milling machines.
• Making new spare parts or machine parts.
• Repairing old parts by turning and rebuilding worn out area.
• Doing wide range of repairs with the lathe, shaper, miller and drilling machine.

Person specifications:

• KCSE/KCE
• Final Craft Certificate,
• Five years’ ( 5) years post qualification experience in a busy workshop handling all machining processes (turning, milling, shaping, gear cutting, etc.),
• Experience in precision machining
• Aged below 45 years

10.    Fabricator 

(2 posts)

Reporting to Workshop Supervisor, the Fabricator will be responsible for

• Reconditioning of old parts e.g. heavy  duty knives, rakes, inter-carrier Tail drum rings
• Fabrication of new parts and refurbishing of equipment.
• Casting of non-ferrous items as requested e.g. aluminum and brass items.
• Making cane knifes.
• Safety awareness.
• Interpretation of drawings
• Production, repair, maintenance and installation of equipment/plant through fabrication processes

Person specifications:

• Minimum KCSE/KCE
• Final Craft Certificate Fabrication & Welding
• Five (5) years’ experience gained in a busy steel fabrication workshop/firm
• Aged below 45 years

If you believe that you demonstrate abilities to meet the criteria of the above positions, please submit your applications with copies of your certificates and other testimonials with a well detailed Curriculum Vitae (CV) immediately but not later than July 14, 2012 to:

Managing Director
South Nyanza Sugar Company Limited
P.O. Box 107 - 40405
Sare - Awendo

Read More